do it yourself bike car

BREAKS

The vehicle is as good as good are its breaks!

Click image to enlarge - free plans for 4 wheel pedal bike

We used two bicycle breaks. They are mounted on transversal carrier (B). Jugs are on the steering wheels. While entering vehicle from the left side, the left break cable goes around to prevent stepping on it while entering the car. We had to turn around all parts of break to get wider part on the outer side, because there wasn't enought space on the inner side of the wheel.

Right side of self made four wheel bicycle

Click image to enlarge - free plans for 4 wheel pedal bike

This sites are just information about what we did. The vehicle is not done by any safety standards and can be life dangerous when producing or using it. You are free to use our design and ideas in part or in whole, but you do it absolutely on your own risk and responsibility!
If using it commercial, you must cite the source: "Designed by www.spiller.si":

INTRODUCTION
DIMENSIONS
CHASSIS FRONT WHEELS
REAR WHEELS
STEERING
STEERING WHEEL
PEDALS
FRONT GEAR
REAR GEAR
SEAT
BREAKS
LINK
OTHER LANGUAGES